HVAC Products

Industrial Products

Glossary

Technical Assistance

Product Selection

Series 1500
Laminated Bellows Expansion Joints

Series 1500 Laminated Bellows Expansion Joints are designed for installations where the principal movement is axial. Standard designs are 2” through 14” NPS with 2” or 3”axial compression. Service conditions are 150 PSIG or 300 PSIG to 500°F.

The bellows element is integrated into the design to provide the minimum effective area and resulting pressure thrust. The laminated construction results in the optimum cycle life and lowest possible spring constant. A stainless steel flow liner is standard with negligible reduction of flow area and resulting flow interference. Standard Series 1500 Laminated Bellows Expansion Joints are available from stock, and they have a Five year full replacement warranty.


Intermediate Guide Spacing/Series 1500 Laminated Bellows Expansion Joints

Series 8500 Expansion Compensators are comparable products that are available in smaller diameters. Steel pipe and copper tube configurations available.

Series 3500 Externally Pressurized Expansion Joints are comparable products with greater travel. Standard designs are available through 24”.

Series 9500 Alignment Guides are designed to maintain the alignment of the pipe adjacent to expansion joints, and as intermediate guides throughout the pipe run.

Series 1500 Expansion Joint


Catalog 1103 pdf 579 KB
Download complete catalog

You will need Acrobat Reader to view this document.

Canadian Registration
This product is registered throughout Canada under CRN 0D9278.59870YTNADD3

Catalog Sections


Introduction and Design Features

Applications

Anchor Forces

Configurations and Materials of Construction

Table 1 Pressure and Force Data

Table 2 150 psig Tabulated Design Data

Table 3 300 psig Tabulated Design Data

Optional Features

Dual Center Anchor Base Configurations

In-Line Pressure Balanced Expansion Joint

Installation Procedure

Five Year Limited Warranty

Copyright © Hyspan Precision Products, Inc. 2005. All rights reserved.
Hyspan ® is a registered trademark.